Mercurial > code > home > repos > homeauto

comparison espNode/office_back_cam.yaml @ 773:bc3516d02762

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
old changes in espNode Ignore-this: cbdcaf859b465e76c2c98e0d4510a1d3
author drewp@bigasterisk.com
date Sun, 28 Jun 2020 14:05:12 -0700
parents
children 7831b5de3572
comparison
equal deleted inserted replaced
772:2500a3ee9102 773:bc3516d02762
1 # device is https://www.amazon.com/ESP32-CAM-Bluetooth-Camera-Module-Development/dp/B07S5PVZKV/ref=sr_1_3
2
3 # has no rst pin, so
4 # 1. connect DTR to IO0
5 # 2. inv monitor-usb --board office_back_cam
6 # 3. press reset button
7 # 4. ctrl-c, inv program-board-over-usb --board office_back_cam
8
9 # mosquitto_sub -v -t office_back_cam/status
10
11 # bang(pts/15):/my/proj/homeauto/espNode% catchsegv ./readcam.py --cam office_back_cam --port 10021
12
13
14
15 esphome:
16 name: office_back_cam
17 platform: ESP32
18 board: esp32cam
19 build_path: build
20
21 wifi:
22 ssid: !secret wifi_ssid
23 password: !secret wifi_password
24 domain: ''
25 use_address: '10.2.0.35'
26
27 mqtt:
28 broker: '10.2.0.1'
29 port: 1883
30 username: ''
31 password: ''
32
33 logger:
34 baud_rate: 115200
35 level: DEBUG
36
37 ota:
38
39 api:
40 port: 6053
41 password: 'MyPassword'
42
43 # https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/
44 esp32_camera:
45 external_clock:
46 pin: GPIO0
47 frequency: 20MHz
48 i2c_pins:
49 sda: GPIO26
50 scl: GPIO27
51 data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
52 vsync_pin: GPIO25
53 href_pin: GPIO23
54 pixel_clock_pin: GPIO22
55 power_down_pin: GPIO32
56
57 name: camera
58
59 # https://github.com/esphome/esphome/blob/dev/esphome/components/esp32_camera/esp32_camera.cpp#L265 says a 'stream' is 5 sec long
60
61 # setting to 5 causes 'Setup Failed: ERROR'
62 max_framerate: 4 fps
63 # https://github.com/raphaelbs/esp32-cam-ai-thinker#capabilities says camera
64 # is likely ov2640 with these native resolutions:
65 # uxga=1600x1200 svga=800x600 cif=400x296
66
67 # 160x120 (QQVGA) 'Got invalid frame', then no more
68 # 128x160 (QQVGA2)
69 # 176x144 (QCIF) fps: 25 jpg: 20 img: 2KB burst of frames then stopped.
70 # fps: 20 jpg: 20 no frames
71 # 240x176 (HQVGA)
72 # 320x240 (QVGA) fps: 10 jpg: 20 some frames, 4.5KB
73 # 400x296 (CIF)
74 # 640x480 (VGA) fps: 4 jpg: 10 works, 20KB
75 # 800x600 (SVGA)
76 # 1024x768 (XGA)
77 # 1280x1024 (SXGA) fps: 1 works
78 # 1600x1200 (UXGA)
79
80 resolution: 640x480
81
82 # 10 to 63. default=10. higher is
83 # worse. https://github.com/esphome/esphome/blob/6682c43dfaeb1c006943ae546145e5f22262cadb/esphome/components/esp32_camera/__init__.py#L84
84 # sets the lower limit to 10, but
85 # https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/components/ov2640/sensors/ov2640.c#L345
86 # suggests that it might be 0 (for an ov2640, anyway).
87 jpeg_quality: 10
88
89 output:
90 - platform: gpio
91 pin: GPIO4
92 id: gpio_4
93
94 light:
95 - platform: fastled_clockless
96 chipset: WS2812B
97 pin: GPIO13
98 num_leds: 1
99 rgb_order: GRB
100 name: "strip"
101 # - platform: monochromatic
102 # name: "flash"
103 # output: flash_out
104 - platform: binary
105 output: gpio_4
106 name: flash
107
108
109 dallas:
110 - pin: GPIO15
111 update_interval: 10s
112
113 sensor:
114 - platform: dallas
115 index: 0
116 name: temperature
117
118 # output:
119 # - platform: ledc
120 # id: flash_out
121 # pin: GPIO4
122 # frequency: 19531Hz