--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/service/busyboxArduino/IRremote/IRremoteInt.h	Mon Jan 19 17:55:26 2015 -0800
@@ -0,0 +1,515 @@
+/*
+ * IRremote
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+ *
+ * Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
+ *
+ * Interrupt code based on NECIRrcv by Joe Knapp
+ * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+ * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+ *
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+ */
+
+#ifndef IRremoteint_h
+#define IRremoteint_h
+
+#if defined(ARDUINO) && ARDUINO >= 100
+#include <Arduino.h>
+#else
+#include <WProgram.h>
+#endif
+
+// define which timer to use
+//
+// Uncomment the timer you wish to use on your board.  If you
+// are using another library which uses timer2, you have options
+// to switch IRremote to use a different timer.
+
+// Arduino Mega
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+  //#define IR_USE_TIMER1   // tx = pin 11
+  #define IR_USE_TIMER2     // tx = pin 9
+  //#define IR_USE_TIMER3   // tx = pin 5
+  //#define IR_USE_TIMER4   // tx = pin 6
+  //#define IR_USE_TIMER5   // tx = pin 46
+
+// Teensy 1.0
+#elif defined(__AVR_AT90USB162__)
+  #define IR_USE_TIMER1     // tx = pin 17
+
+// Teensy 2.0
+#elif defined(__AVR_ATmega32U4__)
+  //#define IR_USE_TIMER1   // tx = pin 14
+  //#define IR_USE_TIMER3   // tx = pin 9
+  #define IR_USE_TIMER4_HS  // tx = pin 10
+
+// Teensy 3.0
+#elif defined(__MK20DX128__)
+  #define IR_USE_TIMER_CMT  // tx = pin 5
+
+// Teensy++ 1.0 & 2.0
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+  //#define IR_USE_TIMER1   // tx = pin 25
+  #define IR_USE_TIMER2     // tx = pin 1
+  //#define IR_USE_TIMER3   // tx = pin 16
+
+// Sanguino
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+  //#define IR_USE_TIMER1   // tx = pin 13
+  #define IR_USE_TIMER2     // tx = pin 14
+
+// Atmega8
+#elif defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
+  #define IR_USE_TIMER1   // tx = pin 9
+
+// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, etc
+#else
+  //#define IR_USE_TIMER1   // tx = pin 9
+  #define IR_USE_TIMER2     // tx = pin 3
+#endif
+
+
+
+#ifdef F_CPU
+#define SYSCLOCK F_CPU     // main Arduino clock
+#else
+#define SYSCLOCK 16000000  // main Arduino clock
+#endif
+
+#define ERR 0
+#define DECODED 1
+
+
+// defines for setting and clearing register bits
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+// Pulse parms are *50-100 for the Mark and *50+100 for the space
+// First MARK is the one after the long gap
+// pulse parameters in usec
+#define NEC_HDR_MARK	9000
+#define NEC_HDR_SPACE	4500
+#define NEC_BIT_MARK	560
+#define NEC_ONE_SPACE	1600
+#define NEC_ZERO_SPACE	560
+#define NEC_RPT_SPACE	2250
+
+#define SONY_HDR_MARK	2400
+#define SONY_HDR_SPACE	600
+#define SONY_ONE_MARK	1200
+#define SONY_ZERO_MARK	600
+#define SONY_RPT_LENGTH 45000
+#define SONY_DOUBLE_SPACE_USECS  500  // usually ssee 713 - not using ticks as get number wrapround
+
+// SA 8650B
+#define SANYO_HDR_MARK	3500  // seen range 3500
+#define SANYO_HDR_SPACE	950 //  seen 950
+#define SANYO_ONE_MARK	2400 // seen 2400  
+#define SANYO_ZERO_MARK 700 //  seen 700
+#define SANYO_DOUBLE_SPACE_USECS  800  // usually ssee 713 - not using ticks as get number wrapround
+#define SANYO_RPT_LENGTH 45000
+
+// Mitsubishi RM 75501
+// 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7 
+
+// #define MITSUBISHI_HDR_MARK	250  // seen range 3500
+#define MITSUBISHI_HDR_SPACE	350 //  7*50+100
+#define MITSUBISHI_ONE_MARK	1950 // 41*50-100
+#define MITSUBISHI_ZERO_MARK  750 // 17*50-100
+// #define MITSUBISHI_DOUBLE_SPACE_USECS  800  // usually ssee 713 - not using ticks as get number wrapround
+// #define MITSUBISHI_RPT_LENGTH 45000
+
+
+#define RC5_T1		889
+#define RC5_RPT_LENGTH	46000
+
+#define RC6_HDR_MARK	2666
+#define RC6_HDR_SPACE	889
+#define RC6_T1		444
+#define RC6_RPT_LENGTH	46000
+
+#define SHARP_BIT_MARK 245
+#define SHARP_ONE_SPACE 1805
+#define SHARP_ZERO_SPACE 795
+#define SHARP_GAP 600000
+#define SHARP_TOGGLE_MASK 0x3FF
+#define SHARP_RPT_SPACE 3000
+
+#define DISH_HDR_MARK 400
+#define DISH_HDR_SPACE 6100
+#define DISH_BIT_MARK 400
+#define DISH_ONE_SPACE 1700
+#define DISH_ZERO_SPACE 2800
+#define DISH_RPT_SPACE 6200
+#define DISH_TOP_BIT 0x8000
+
+#define PANASONIC_HDR_MARK 3502
+#define PANASONIC_HDR_SPACE 1750
+#define PANASONIC_BIT_MARK 502
+#define PANASONIC_ONE_SPACE 1244
+#define PANASONIC_ZERO_SPACE 400
+
+#define JVC_HDR_MARK 8000
+#define JVC_HDR_SPACE 4000
+#define JVC_BIT_MARK 600
+#define JVC_ONE_SPACE 1600
+#define JVC_ZERO_SPACE 550
+#define JVC_RPT_LENGTH 60000
+
+#define LG_HDR_MARK 8000
+#define LG_HDR_SPACE 4000
+#define LG_BIT_MARK 600
+#define LG_ONE_SPACE 1600
+#define LG_ZERO_SPACE 550
+#define LG_RPT_LENGTH 60000
+
+#define SAMSUNG_HDR_MARK  5000
+#define SAMSUNG_HDR_SPACE 5000
+#define SAMSUNG_BIT_MARK  560
+#define SAMSUNG_ONE_SPACE 1600
+#define SAMSUNG_ZERO_SPACE  560
+#define SAMSUNG_RPT_SPACE 2250
+
+
+#define SHARP_BITS 15
+#define DISH_BITS 16
+
+#define TOLERANCE 25  // percent tolerance in measurements
+#define LTOL (1.0 - TOLERANCE/100.) 
+#define UTOL (1.0 + TOLERANCE/100.) 
+
+#define _GAP 5000 // Minimum map between transmissions
+#define GAP_TICKS (_GAP/USECPERTICK)
+
+#define TICKS_LOW(us) (int) (((us)*LTOL/USECPERTICK))
+#define TICKS_HIGH(us) (int) (((us)*UTOL/USECPERTICK + 1))
+
+// receiver states
+#define STATE_IDLE     2
+#define STATE_MARK     3
+#define STATE_SPACE    4
+#define STATE_STOP     5
+
+// information for the interrupt handler
+typedef struct {
+  uint8_t recvpin;           // pin for IR data from detector
+  uint8_t rcvstate;          // state machine
+  uint8_t blinkflag;         // TRUE to enable blinking of pin 13 on IR processing
+  unsigned int timer;     // state timer, counts 50uS ticks.
+  unsigned int rawbuf[RAWBUF]; // raw data
+  uint8_t rawlen;         // counter of entries in rawbuf
+} 
+irparams_t;
+
+// Defined in IRremote.cpp
+extern volatile irparams_t irparams;
+
+// IR detector output is active low
+#define MARK  0
+#define SPACE 1
+
+#define TOPBIT 0x80000000
+
+#define NEC_BITS 32
+#define SONY_BITS 12
+#define SANYO_BITS 12
+#define MITSUBISHI_BITS 16
+#define MIN_RC5_SAMPLES 11
+#define MIN_RC6_SAMPLES 1
+#define PANASONIC_BITS 48
+#define JVC_BITS 16
+#define LG_BITS 28
+#define SAMSUNG_BITS 32
+
+
+
+
+// defines for timer2 (8 bits)
+#if defined(IR_USE_TIMER2)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR2A |= _BV(COM2B1))
+#define TIMER_DISABLE_PWM    (TCCR2A &= ~(_BV(COM2B1)))
+#define TIMER_ENABLE_INTR    (TIMSK2 = _BV(OCIE2A))
+#define TIMER_DISABLE_INTR   (TIMSK2 = 0)
+#define TIMER_INTR_NAME      TIMER2_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR2A = _BV(WGM20); \
+  TCCR2B = _BV(WGM22) | _BV(CS20); \
+  OCR2A = pwmval; \
+  OCR2B = pwmval / 3; \
+})
+#define TIMER_COUNT_TOP      (SYSCLOCK * USECPERTICK / 1000000)
+#if (TIMER_COUNT_TOP < 256)
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR2A = _BV(WGM21); \
+  TCCR2B = _BV(CS20); \
+  OCR2A = TIMER_COUNT_TOP; \
+  TCNT2 = 0; \
+})
+#else
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR2A = _BV(WGM21); \
+  TCCR2B = _BV(CS21); \
+  OCR2A = TIMER_COUNT_TOP / 8; \
+  TCNT2 = 0; \
+})
+#endif
+#if defined(CORE_OC2B_PIN)
+#define TIMER_PWM_PIN        CORE_OC2B_PIN  /* Teensy */
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define TIMER_PWM_PIN        9  /* Arduino Mega */
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#define TIMER_PWM_PIN        14 /* Sanguino */
+#else
+#define TIMER_PWM_PIN        3  /* Arduino Duemilanove, Diecimila, LilyPad, etc */
+#endif
+
+
+// defines for timer1 (16 bits)
+#elif defined(IR_USE_TIMER1)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR1A |= _BV(COM1A1))
+#define TIMER_DISABLE_PWM    (TCCR1A &= ~(_BV(COM1A1)))
+#if defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
+  #define TIMER_ENABLE_INTR    (TIMSK = _BV(OCIE1A))
+  #define TIMER_DISABLE_INTR   (TIMSK = 0)
+#else
+  #define TIMER_ENABLE_INTR    (TIMSK1 = _BV(OCIE1A))
+  #define TIMER_DISABLE_INTR   (TIMSK1 = 0)
+#endif
+#define TIMER_INTR_NAME      TIMER1_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR1A = _BV(WGM11); \
+  TCCR1B = _BV(WGM13) | _BV(CS10); \
+  ICR1 = pwmval; \
+  OCR1A = pwmval / 3; \
+})
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR1A = 0; \
+  TCCR1B = _BV(WGM12) | _BV(CS10); \
+  OCR1A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT1 = 0; \
+})
+#if defined(CORE_OC1A_PIN)
+#define TIMER_PWM_PIN        CORE_OC1A_PIN  /* Teensy */
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define TIMER_PWM_PIN        11  /* Arduino Mega */
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#define TIMER_PWM_PIN        13 /* Sanguino */
+#else
+#define TIMER_PWM_PIN        9  /* Arduino Duemilanove, Diecimila, LilyPad, etc */
+#endif
+
+
+// defines for timer3 (16 bits)
+#elif defined(IR_USE_TIMER3)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR3A |= _BV(COM3A1))
+#define TIMER_DISABLE_PWM    (TCCR3A &= ~(_BV(COM3A1)))
+#define TIMER_ENABLE_INTR    (TIMSK3 = _BV(OCIE3A))
+#define TIMER_DISABLE_INTR   (TIMSK3 = 0)
+#define TIMER_INTR_NAME      TIMER3_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR3A = _BV(WGM31); \
+  TCCR3B = _BV(WGM33) | _BV(CS30); \
+  ICR3 = pwmval; \
+  OCR3A = pwmval / 3; \
+})
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR3A = 0; \
+  TCCR3B = _BV(WGM32) | _BV(CS30); \
+  OCR3A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT3 = 0; \
+})
+#if defined(CORE_OC3A_PIN)
+#define TIMER_PWM_PIN        CORE_OC3A_PIN  /* Teensy */
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define TIMER_PWM_PIN        5  /* Arduino Mega */
+#else
+#error "Please add OC3A pin number here\n"
+#endif
+
+
+// defines for timer4 (10 bits, high speed option)
+#elif defined(IR_USE_TIMER4_HS)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR4A |= _BV(COM4A1))
+#define TIMER_DISABLE_PWM    (TCCR4A &= ~(_BV(COM4A1)))
+#define TIMER_ENABLE_INTR    (TIMSK4 = _BV(TOIE4))
+#define TIMER_DISABLE_INTR   (TIMSK4 = 0)
+#define TIMER_INTR_NAME      TIMER4_OVF_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR4A = (1<<PWM4A); \
+  TCCR4B = _BV(CS40); \
+  TCCR4C = 0; \
+  TCCR4D = (1<<WGM40); \
+  TCCR4E = 0; \
+  TC4H = pwmval >> 8; \
+  OCR4C = pwmval; \
+  TC4H = (pwmval / 3) >> 8; \
+  OCR4A = (pwmval / 3) & 255; \
+})
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR4A = 0; \
+  TCCR4B = _BV(CS40); \
+  TCCR4C = 0; \
+  TCCR4D = 0; \
+  TCCR4E = 0; \
+  TC4H = (SYSCLOCK * USECPERTICK / 1000000) >> 8; \
+  OCR4C = (SYSCLOCK * USECPERTICK / 1000000) & 255; \
+  TC4H = 0; \
+  TCNT4 = 0; \
+})
+#if defined(CORE_OC4A_PIN)
+#define TIMER_PWM_PIN        CORE_OC4A_PIN  /* Teensy */
+#elif defined(__AVR_ATmega32U4__)
+#define TIMER_PWM_PIN        13  /* Leonardo */
+#else
+#error "Please add OC4A pin number here\n"
+#endif
+
+
+// defines for timer4 (16 bits)
+#elif defined(IR_USE_TIMER4)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR4A |= _BV(COM4A1))
+#define TIMER_DISABLE_PWM    (TCCR4A &= ~(_BV(COM4A1)))
+#define TIMER_ENABLE_INTR    (TIMSK4 = _BV(OCIE4A))
+#define TIMER_DISABLE_INTR   (TIMSK4 = 0)
+#define TIMER_INTR_NAME      TIMER4_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR4A = _BV(WGM41); \
+  TCCR4B = _BV(WGM43) | _BV(CS40); \
+  ICR4 = pwmval; \
+  OCR4A = pwmval / 3; \
+})
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR4A = 0; \
+  TCCR4B = _BV(WGM42) | _BV(CS40); \
+  OCR4A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT4 = 0; \
+})
+#if defined(CORE_OC4A_PIN)
+#define TIMER_PWM_PIN        CORE_OC4A_PIN
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define TIMER_PWM_PIN        6  /* Arduino Mega */
+#else
+#error "Please add OC4A pin number here\n"
+#endif
+
+
+// defines for timer5 (16 bits)
+#elif defined(IR_USE_TIMER5)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR5A |= _BV(COM5A1))
+#define TIMER_DISABLE_PWM    (TCCR5A &= ~(_BV(COM5A1)))
+#define TIMER_ENABLE_INTR    (TIMSK5 = _BV(OCIE5A))
+#define TIMER_DISABLE_INTR   (TIMSK5 = 0)
+#define TIMER_INTR_NAME      TIMER5_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR5A = _BV(WGM51); \
+  TCCR5B = _BV(WGM53) | _BV(CS50); \
+  ICR5 = pwmval; \
+  OCR5A = pwmval / 3; \
+})
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR5A = 0; \
+  TCCR5B = _BV(WGM52) | _BV(CS50); \
+  OCR5A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT5 = 0; \
+})
+#if defined(CORE_OC5A_PIN)
+#define TIMER_PWM_PIN        CORE_OC5A_PIN
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define TIMER_PWM_PIN        46  /* Arduino Mega */
+#else
+#error "Please add OC5A pin number here\n"
+#endif
+
+
+// defines for special carrier modulator timer
+#elif defined(IR_USE_TIMER_CMT)
+#define TIMER_RESET ({			\
+	uint8_t tmp = CMT_MSC;		\
+	CMT_CMD2 = 30;			\
+})
+#define TIMER_ENABLE_PWM     CORE_PIN5_CONFIG = PORT_PCR_MUX(2)|PORT_PCR_DSE|PORT_PCR_SRE
+#define TIMER_DISABLE_PWM    CORE_PIN5_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_DSE|PORT_PCR_SRE
+#define TIMER_ENABLE_INTR    NVIC_ENABLE_IRQ(IRQ_CMT)
+#define TIMER_DISABLE_INTR   NVIC_DISABLE_IRQ(IRQ_CMT)
+#define TIMER_INTR_NAME      cmt_isr
+#ifdef ISR
+#undef ISR
+#endif
+#define ISR(f) void f(void)
+#if F_BUS == 48000000
+#define CMT_PPS_VAL 5
+#else
+#define CMT_PPS_VAL 2
+#endif
+#define TIMER_CONFIG_KHZ(val) ({ 	\
+	SIM_SCGC4 |= SIM_SCGC4_CMT;	\
+	SIM_SOPT2 |= SIM_SOPT2_PTD7PAD;	\
+	CMT_PPS = CMT_PPS_VAL;		\
+	CMT_CGH1 = 2667 / val;		\
+	CMT_CGL1 = 5333 / val;		\
+	CMT_CMD1 = 0;			\
+	CMT_CMD2 = 30;			\
+	CMT_CMD3 = 0;			\
+	CMT_CMD4 = 0;			\
+	CMT_OC = 0x60;			\
+	CMT_MSC = 0x01;			\
+})
+#define TIMER_CONFIG_NORMAL() ({	\
+	SIM_SCGC4 |= SIM_SCGC4_CMT;	\
+	CMT_PPS = CMT_PPS_VAL;		\
+	CMT_CGH1 = 1;			\
+	CMT_CGL1 = 1;			\
+	CMT_CMD1 = 0;			\
+	CMT_CMD2 = 30;			\
+	CMT_CMD3 = 0;			\
+	CMT_CMD4 = 19;			\
+	CMT_OC = 0;			\
+	CMT_MSC = 0x03;			\
+})
+#define TIMER_PWM_PIN        5
+
+
+#else // unknown timer
+#error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
+#endif
+
+
+// defines for blinking the LED
+#if defined(CORE_LED0_PIN)
+#define BLINKLED       CORE_LED0_PIN
+#define BLINKLED_ON()  (digitalWrite(CORE_LED0_PIN, HIGH))
+#define BLINKLED_OFF() (digitalWrite(CORE_LED0_PIN, LOW))
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define BLINKLED       13
+#define BLINKLED_ON()  (PORTB |= B10000000)
+#define BLINKLED_OFF() (PORTB &= B01111111)
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#define BLINKLED       0
+#define BLINKLED_ON()  (PORTD |= B00000001)
+#define BLINKLED_OFF() (PORTD &= B11111110)
+#else
+#define BLINKLED       13
+#define BLINKLED_ON()  (PORTB |= B00100000)
+#define BLINKLED_OFF() (PORTB &= B11011111)
+#endif
+
+#endif