esphome:
  name: rfsetup
  platform: esp32
  board: lolin32
            
logger:
  baud_rate: 115200
  level: VERBOSE
  logs:
    out: VERBOSE

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  # use_address: 10.2.0.38

ota:

mqtt:
  broker: '10.2.0.1'
  port: 1883
  username: ''
  password: ''
  

remote_receiver:
  - id: rf_in
    pin: GPIO4
    tolerance: 20%
    filter: 250us
    idle: 8ms
    dump: rc_switch
    on_rc_switch:
      then:
        # - logger.log: 
        #     level: INFO
        #     tag: out
        #     format: "RF read; proto %d; code %08llx"
        #     args: [x.protocol, x.code]
        - mqtt.publish_json:
            topic: rfsetup/rf_received
            payload: !lambda |-
              root["protocol"] = x.protocol;
              root["code0"] = static_cast<unsigned long>(x.code >> 32); 
              root["code1"] = static_cast<unsigned long>(x.code & 0xffff);