# reusable for all ESP32-CAM programmed over ESP32-CAM-MB

# mosquitto_sub  -v -t cam0/status

# bang(pts/15):/my/proj/homeauto/espNode% catchsegv ./readcam.py --cam office_back_cam  --port 10021

esphome:
  name: $name
  platform: ESP32
  board: esp32cam
  build_path: $build_path
  includes:
    - component/cam.h

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  domain: ''
  manual_ip:
    static_ip: $addr
    gateway: 10.2.0.3
    subnet: 255.255.0.0

mqtt:
  broker: '10.2.0.1'
  port: 1883
  username: ''
  password: ''
  
logger:
  baud_rate: 115200
  level: DEBUG
  
ota:

light:
  - platform: monochromatic
    name: "flash"
    output: flash_out
    default_transition_length: 0s

output:
  - platform: ledc
    id: flash_out
    pin: GPIO4
    frequency: 19531Hz
    channel: 4


custom_component:
  - lambda: |-
      auto camc = new esphome::CamComponent();  
      // App.register_component(camc);
      return {camc};


# ffplay -i http://10.2.0.22:81/stream -vf hqdn3d=luma_spatial=0:chroma_spatial=50:luma_tmp=10:chroma_tmp=10

# maybe this first:
#  vaguedenoiser=threshold=5





# # https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/
# esp32_camera:
#   external_clock:
#     pin: GPIO0
#     frequency: 20MHz
#   i2c_pins:
#     sda: GPIO26
#     scl: GPIO27
#   data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
#   vsync_pin: GPIO25
#   href_pin: GPIO23
#   pixel_clock_pin: GPIO22
#   power_down_pin: GPIO32

#   name: camera

#   # https://github.com/esphome/esphome/blob/dev/esphome/components/esp32_camera/esp32_camera.cpp#L265 says a 'stream' is 5 sec long

#   # setting to 5 causes 'Setup Failed: ERROR'
#   # max_framerate: 4 fps
#   # https://github.com/raphaelbs/esp32-cam-ai-thinker#capabilities says camera
#   # is likely ov2640 with these native resolutions:
#   # uxga=1600x1200 svga=800x600 cif=400x296
  
#   #   160x120 (QQVGA)    'Got invalid frame', then no more
#   #   128x160 (QQVGA2)
#   #   176x144 (QCIF)     fps: 25 jpg: 20 img: 2KB burst of frames then stopped. 
#   #                      fps: 20 jpg: 20 no frames
#   #   240x176 (HQVGA)
#   #   320x240 (QVGA)     fps: 10 jpg: 20 some frames, 4.5KB
#   #   400x296 (CIF)
#   #   640x480 (VGA)      fps: 4 jpg: 10 works,  20KB
#   #   800x600 (SVGA)
#   #   1024x768 (XGA)
#   #   1280x1024 (SXGA)   fps: 1  works
#   #   1600x1200 (UXGA)

#   resolution: 320x240
  
#   # 10 to 63. default=10. higher is
#   # worse. https://github.com/esphome/esphome/blob/6682c43dfaeb1c006943ae546145e5f22262cadb/esphome/components/esp32_camera/__init__.py#L84
#   # sets the lower limit to 10, but
#   # https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/components/ov2640/sensors/ov2640.c#L345
#   # suggests that it might be 0 (for an ov2640, anyway).
#   # jpeg_quality: 10

# esp32_camera_web_server:
#   - {port: 8000, mode: stream}
#   - {port: 8001, mode: snapshot}