view service/arduinoNode/readme @ 1530:f4e1493e9526

there's a plan Ignore-this: 994107ade471f5e66c4746996c9e5a11 darcs-hash:dd80cdf9badb6cc9fb22989a34ce555e663f63f0
author drewp <drewp@bigasterisk.com>
date Wed, 05 Feb 2020 17:12:18 -0800
parents 70a5392b24d3
children
line wrap: on
line source

node config file:

  board:b0 :device "/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A900cepU-if00-port0";
    :boardTag "diecimila";
    :connectedTo sensor:motion0 .
    
  sensor:motion0 a :MotionSensor;
    :pin board0:pin3
    :sees :downhallway .

  output:out0 a :GeneralOutput ;
    :pin board0:pin3; 
    :controls :heater .

  output:out1 a :ShiftBrite;
    :shiftbriteL board0:pin5;
    :shiftbriteD board0:pin11;
    :shiftbriteC board0:pin12 .

  output:out2 a :IrEmitter;
    :pin board0:pin4
    .
    
  output:out3 a :RgbStrip;
    :ledCount 10
    .

  output:out4 a :OneWireBus;
    :pin board0:pin5
    :connectedTo sensor:temp0, sensor:temp1 .

  sensor:temp0 a :TemperatureSensor;
    :oneWireAddress "12:14:35:23";
    :feels :downhallway;
    :location house:wall31;
    :height "80cm"
    :pollPeriod "60sec"
    .

  sensor:ir1 a :PowerMeterMonitor;
    :reads :housePower;
    .
    

linux side host:
  read config. we may have any number of arduinos.
  serve the complete arduino code to run.
  poll inputs.
  serve outputs.
  upon request, build arduino code and deploy it.

emits this graph:
    board:b0 a :connectedBoard;
      :host :bang;
      :lastSeen "-1sec" .
    sensor:motion0
      :sees :downhallway;
      :motionState :noMotion;
      :lastRead "16:30:00";
      :lastMotion "16:02:00" .
    sensor:theaterIrDetect
      :sawCode "0e55cc" .
    sensor:ir1 a :PowerMeterMonitor;
      :currentWatts 462;
      :lastPulseTime "16:09:00";
      :kwhPerBlink 1.0;