Mercurial > code > home > repos > homeauto
changeset 773:bc3516d02762
old changes in espNode
Ignore-this: cbdcaf859b465e76c2c98e0d4510a1d3
| author | drewp@bigasterisk.com |
|---|---|
| date | Sun, 28 Jun 2020 14:05:12 -0700 |
| parents | 2500a3ee9102 |
| children | d05e2396ea5c |
| files | espNode/air_quality_indoor.yaml espNode/air_quality_outdoor.yaml espNode/aircase.blend espNode/bed.yaml espNode/bed_bar_asher.yaml espNode/cabin.yaml espNode/caseback.stl espNode/casefront.stl espNode/esp8266_nightlight.yaml espNode/frontwindow.yaml espNode/garage_hall_cam.yaml espNode/garage_outside_cam.yaml espNode/nightlight_ari.yaml espNode/office_back_cam.yaml espNode/readcam.py espNode/sonoff_light.yaml espNode/tasks.py espNode/theater_blaster.yaml |
| diffstat | 18 files changed, 745 insertions(+), 106 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/air_quality_indoor.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,66 @@ +esphome: + name: air_quality_indoor + platform: ESP32 + board: lolin32 + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: '' + use_address: 10.2.0.32 + +logger: + baud_rate: 115200 + level: DEBUG + logs: + sensor: INFO + pmsx003: INFO + bme280.sensor: INFO + ccs811: INFO + +ota: + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +i2c: + sda: 21 + scl: 22 + scan: True + id: bus_a + +# GPIO13/RXD2 num 16 = pms tx (pin 5) +# GPIO15/TXD2 num 17 = pms rx (pin 4) +uart: + rx_pin: 16 + baud_rate: 9600 + +sensor: + - platform: bme280 + temperature: + name: "BME280 Temperature" + pressure: + name: "BME280 Pressure" + humidity: + name: "BME280 Humidity" + address: 0x76 + update_interval: 30s + - platform: ccs811 + eco2: + name: "CCS811 eCO2 Value" + tvoc: + name: "CCS811 Total Volatile Organic Compound" + address: 0x5A + update_interval: 60s + - platform: pmsx003 + type: PMSX003 + pm_1_0: + name: "Particulate Matter <1.0µm Concentration" + pm_2_5: + name: "Particulate Matter <2.5µm Concentration" + pm_10_0: + name: "Particulate Matter <10.0µm Concentration"
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/air_quality_outdoor.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,66 @@ +esphome: + name: air_quality_outdoor + platform: ESP32 + board: lolin32 + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: '' + use_address: 10.2.0.33 + +logger: + baud_rate: 115200 + level: DEBUG + logs: + sensor: INFO + pmsx003: INFO + bme280.sensor: INFO + ccs811: INFO + +ota: + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +i2c: + sda: 21 + scl: 22 + scan: True + id: bus_a + +# GPIO13/RXD2 num 16 = pms tx (pin 5) +# GPIO15/TXD2 num 17 = pms rx (pin 4) +uart: + rx_pin: 16 + baud_rate: 9600 + +sensor: + - platform: bme280 + temperature: + name: "BME280 Temperature" + pressure: + name: "BME280 Pressure" + humidity: + name: "BME280 Humidity" + address: 0x76 + update_interval: 30s + - platform: ccs811 + eco2: + name: "CCS811 eCO2 Value" + tvoc: + name: "CCS811 Total Volatile Organic Compound" + address: 0x5A + update_interval: 60s + - platform: pmsx003 + type: PMSX003 + pm_1_0: + name: "Particulate Matter <1.0µm Concentration" + pm_2_5: + name: "Particulate Matter <2.5µm Concentration" + pm_10_0: + name: "Particulate Matter <10.0µm Concentration"
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/bed.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,89 @@ +# https://cdn.hackaday.io/files/269911154782944/Heltec_WIFI-LoRa-32_DiagramPinout.jpg + +esphome: + name: bed + platform: ESP32 + board: lolin32 + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: '' + use_address: 10.2.0.90 # not stable! + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +logger: + baud_rate: 115200 + level: DEBUG + +ota: + +#dallas: +# - pin: GPIO16 +#sensor: +# - platform: dallas +# index: 0 +# name: temperature + +switch: + - {platform: gpio, pin: {mode: INPUT_PULLUP, number: 2, inverted: yes}, name: red_button} + - {platform: gpio, pin: {mode: INPUT_PULLUP, number: 15, inverted: yes}, name: green_button} + - {platform: gpio, pin: GPIO16, name: pir} + +output: + - {platform: ledc, pin: GPIO19, id: headboard_w } + - {platform: ledc, pin: GPIO23, id: headboard_r } + - {platform: ledc, pin: GPIO18, id: headboard_g } + - {platform: ledc, pin: GPIO17, id: headboard_b } + +light: + - platform: rgbw + name: headboard + red: headboard_r + green: headboard_g + blue: headboard_b + white: headboard_w + + +i2c: + sda: 4 + scl: 15 + +font: + - file: "/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf" + id: font_vera + size: 12 + glyphs: "+-_.:0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz" + +text_sensor: + - platform: wifi_info + ip_address: + name: wifi_ip + id: wifi_ip + ssid: + name: wifi_ssid + bssid: + name: wifi_bssid + +sensor: + - platform: wifi_signal + id: my_wifi_signal + name: wifi_signal + update_interval: 4s + internal: true # no mqtt + +display: + - platform: ssd1306_i2c + model: "SSD1306 128x64" + reset_pin: 16 + address: 0x3C + lambda: |- + it.print(0, 0, id(font_vera), "bed 2: running"); + it.printf(0, 20, id(font_vera), "wifi %s %.2f", id(wifi_ip).state.c_str(), id(my_wifi_signal).state); +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/bed_bar_asher.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,66 @@ +esphome: + name: bed_bar_asher + platform: esp8266 + board: esp12e + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: '' + use_address: 10.2.0.36 + +logger: + baud_rate: 115200 + level: DEBUG + +ota: + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +light: + - platform: fastled_clockless + chipset: WS2812B + pin: GPIO14 + num_leds: 38 + rgb_order: GRB + name: "strip" + +binary_sensor: + - platform: gpio + name: "button 1" + pin: + number: GPIO12 + mode: INPUT_PULLUP + inverted: True + filters: + - delayed_off: 10ms + - platform: gpio + name: "button 2" + pin: + number: GPIO10 + mode: INPUT_PULLUP + inverted: True + filters: + - delayed_off: 10ms + - platform: gpio + name: "button 3" + pin: + number: GPIO5 + mode: INPUT_PULLUP + inverted: True + filters: + - delayed_off: 10ms + - platform: gpio + name: "button 4" + pin: + number: GPIO4 + mode: INPUT_PULLUP + inverted: True + filters: + - delayed_off: 10ms +
--- a/espNode/cabin.yaml Sun Jun 28 14:03:10 2020 -0700 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,58 +0,0 @@ -# https://cdn.hackaday.io/files/269911154782944/Heltec_WIFI-LoRa-32_DiagramPinout.jpg - -esphome: - name: cabin - platform: ESP32 - board: lolin32 - build_path: build - esphome_core_version: latest - -wifi: - ssid: !secret wifi_ssid - password: !secret wifi_password - domain: '' - -mqtt: - broker: '10.2.0.1' - port: 1883 - username: '' - password: '' - -logger: - baud_rate: 115200 - level: DEBUG - -ota: - - -#dallas: -# - pin: GPIO16 -#sensor: -# - platform: dallas -# index: 0 -# name: temperature - -light: - - platform: fastled_clockless - chipset: WS2812B - pin: GPIO21 - num_leds: 16 - rgb_order: GRB - name: "rgb" - -i2c: - sda: 4 - scl: 15 - -font: - - file: "/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf" - id: font_vera - size: 14 - -display: - - platform: ssd1306_i2c - model: "SSD1306 128x64" - reset_pin: 16 - address: 0x3C - lambda: |- - it.print(0, 0, id(font_vera), "cabin 1.0: running");
--- a/espNode/esp8266_nightlight.yaml Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/esp8266_nightlight.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -8,7 +8,8 @@ wifi: ssid: !secret wifi_ssid password: !secret wifi_password - domain: '' + use_address: ${wifi_addr} + domain: '.bigasterisk.com' mqtt: broker: '10.2.0.1' @@ -18,6 +19,6 @@ logger: baud_rate: 115200 - level: DEBUG + level: INFO ota:
--- a/espNode/frontwindow.yaml Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/frontwindow.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -1,7 +1,8 @@ substitutions: location: display1 board: d1_mini - + wifi_addr: 10.2.0.97 + <<: !include esp8266_nightlight.yaml i2c: @@ -9,33 +10,67 @@ scl: D5 font: - - file: "/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf" - id: font_big - size: 24 - - file: "/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf" - id: font_small - size: 12 + - file: "Oswald-Regular.ttf" + id: font_20 + size: 20 + glyphs: ' .ASacdegiknorstuwDpCf' + - file: "Oswald-Regular.ttf" + id: font_13 + size: 13 + glyphs: 'CLOUcdeklnopsD. ' + - file: "Oswald-Regular.ttf" + id: font_10 + size: 10 + glyphs: ' %0123456789.:NekortwDpnb-dB' text_sensor: - platform: mqtt_subscribe - name: "Data from topic" - id: bigtext - topic: frontwindow/bigtext + name: "line1" + id: line1 + topic: frontwindow/line1 + on_value: + then: + - component.update: my_display + - platform: mqtt_subscribe + name: "line2" + id: line2 + topic: frontwindow/line2 + on_value: + then: + - component.update: my_display - platform: mqtt_subscribe - name: "Data from topic" - id: smalltext - topic: frontwindow/smalltext + name: "line3" + id: line3 + topic: frontwindow/line3 + on_value: + then: + - component.update: my_display + - platform: mqtt_subscribe + name: "line4" + id: line4 + topic: frontwindow/line4 + on_value: + then: + - component.update: my_display + +sensor: + - platform: wifi_signal + name: "WiFi Signal Sensor" + update_interval: 10s + id: wifi_db display: - platform: ssd1306_i2c + id: my_display model: "SSD1306 128x64" address: 0x3c lambda: |- it.rectangle(0, 0, 127, 63); - it.printf(64, 5, id(font_big), TextAlign::TOP_CENTER, id(bigtext).state.c_str()); - it.printf(64, 63-5, id(font_small), TextAlign::BOTTOM_CENTER, id(smalltext).state.c_str()); - - + it.printf(64, 3, id(font_20), TextAlign::TOP_CENTER, id(line1).state.c_str()); + it.printf(30, 28, id(font_13), TextAlign::TOP_CENTER, id(line2).state.c_str()); + it.printf(103, 28, id(font_13), TextAlign::TOP_CENTER, id(line3).state.c_str()); + it.printf(64, 63 - 5, id(font_10), TextAlign::BOTTOM_CENTER, "Network: %d dB", static_cast<int8_t>(id(wifi_db).state)); + spi: clk_pin: D4 miso_pin: D1 @@ -48,5 +83,6 @@ then: - mqtt.publish: topic: frontwindow/tag + retain: false payload: !lambda 'return x;'
--- a/espNode/garage_hall_cam.yaml Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/garage_hall_cam.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -1,5 +1,8 @@ # jump IO0 to GND on the board for programming +# bang(pts/13):/my/proj/homeauto/espNode% forever { catchsegv ./readcam.py --cam garage_hall_cam --port 10020 -v } + + esphome: name: garage_hall_cam platform: ESP32 @@ -10,7 +13,7 @@ ssid: !secret wifi_ssid password: !secret wifi_password domain: '' - use_address: 10.2.0.21 + use_address: 10.2.0.28 #mqtt: # broker: '10.2.0.1' @@ -42,12 +45,30 @@ power_down_pin: GPIO32 name: camera + + # https://github.com/esphome/esphome/blob/dev/esphome/components/esp32_camera/esp32_camera.cpp#L265 says a 'stream' is 5 sec long + # setting to 5 causes 'Setup Failed: ERROR' - max_framerate: 1 fps + max_framerate: 4 fps # https://github.com/raphaelbs/esp32-cam-ai-thinker#capabilities says camera # is likely ov2640 with these native resolutions: # uxga=1600x1200 svga=800x600 cif=400x296 # My camera has 'Setup Failed: ERROR' if this is not 640x480. Not sure why. + # Also the camera had 'Setup Failed: ERROR' when its cable needed reseating. + + # 160x120 (QQVGA) 'Got invalid frame', then no more + # 128x160 (QQVGA2) + # 176x144 (QCIF) fps: 25 jpg: 20 img: 2KB burst of frames then stopped. + # fps: 20 jpg: 20 no frames + # 240x176 (HQVGA) + # 320x240 (QVGA) fps: 10 jpg: 20 some frames, 4.5KB + # 400x296 (CIF) + # 640x480 (VGA) fps: 4 jpg: 10 works, 20KB + # 800x600 (SVGA) + # 1024x768 (XGA) + # 1280x1024 (SXGA) fps: 1 works + # 1600x1200 (UXGA) + resolution: 640x480 # 10 to 63. default=10. higher is @@ -55,5 +76,5 @@ # sets the lower limit to 10, but # https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/components/ov2640/sensors/ov2640.c#L345 # suggests that it might be 0 (for an ov2640, anyway). - jpeg_quality: 20 + jpeg_quality: 10
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/garage_outside_cam.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,97 @@ +# device is https://www.amazon.com/ESP32-CAM-Bluetooth-Camera-Module-Development/dp/B07S5PVZKV/ref=sr_1_3 + +# has no rst pin, so +# 1. connect DTR to IO0 +# 2. inv monitor-usb --board office_back_cam +# 3. press reset button +# 4. ctrl-c, inv program-board-over-usb --board office_back_cam + +# mosquitto_sub -v -t office_back_cam/status + +# bang(pts/15):/my/proj/homeauto/espNode% catchsegv ./readcam.py --cam office_back_cam --port 10021 + + + +esphome: + name: garage_outside_cam + platform: ESP32 + board: esp32cam + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: '' + use_address: '10.2.0.44' + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +logger: + baud_rate: 115200 + level: DEBUG + +ota: + +api: + port: 6053 + password: 'MyPassword' + +# https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/ +esp32_camera: + external_clock: + pin: GPIO0 + frequency: 20MHz + i2c_pins: + sda: GPIO26 + scl: GPIO27 + data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35] + vsync_pin: GPIO25 + href_pin: GPIO23 + pixel_clock_pin: GPIO22 + power_down_pin: GPIO32 + + name: camera + + # https://github.com/esphome/esphome/blob/dev/esphome/components/esp32_camera/esp32_camera.cpp#L265 says a 'stream' is 5 sec long + + # setting to 5 causes 'Setup Failed: ERROR' + max_framerate: 4 fps + # https://github.com/raphaelbs/esp32-cam-ai-thinker#capabilities says camera + # is likely ov2640 with these native resolutions: + # uxga=1600x1200 svga=800x600 cif=400x296 + + # 160x120 (QQVGA) 'Got invalid frame', then no more + # 128x160 (QQVGA2) + # 176x144 (QCIF) fps: 25 jpg: 20 img: 2KB burst of frames then stopped. + # fps: 20 jpg: 20 no frames + # 240x176 (HQVGA) + # 320x240 (QVGA) fps: 10 jpg: 20 some frames, 4.5KB + # 400x296 (CIF) + # 640x480 (VGA) fps: 4 jpg: 10 works, 20KB + # 800x600 (SVGA) + # 1024x768 (XGA) + # 1280x1024 (SXGA) fps: 1 works + # 1600x1200 (UXGA) + + resolution: 640x480 + + # 10 to 63. default=10. higher is + # worse. https://github.com/esphome/esphome/blob/6682c43dfaeb1c006943ae546145e5f22262cadb/esphome/components/esp32_camera/__init__.py#L84 + # sets the lower limit to 10, but + # https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/components/ov2640/sensors/ov2640.c#L345 + # suggests that it might be 0 (for an ov2640, anyway). + jpeg_quality: 10 + +output: + - platform: gpio + pin: GPIO4 + id: gpio_4 + +light: + - platform: binary + output: gpio_4 + name: flash
--- a/espNode/nightlight_ari.yaml Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/nightlight_ari.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -1,10 +1,32 @@ -substitutions: - location: ari +esphome: + name: nightlight_ari + platform: esp8266 + board: esp12e + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + use_address: 10.2.0.96 +# domain: '.bigasterisk.com' -<<: !include esp8266_nightlight.yaml +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +logger: + baud_rate: 115200 + level: INFO + +ota: + dallas: - pin: GPIO5 + update_interval: 10s + sensor: - platform: dallas index: 0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/office_back_cam.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,122 @@ +# device is https://www.amazon.com/ESP32-CAM-Bluetooth-Camera-Module-Development/dp/B07S5PVZKV/ref=sr_1_3 + +# has no rst pin, so +# 1. connect DTR to IO0 +# 2. inv monitor-usb --board office_back_cam +# 3. press reset button +# 4. ctrl-c, inv program-board-over-usb --board office_back_cam + +# mosquitto_sub -v -t office_back_cam/status + +# bang(pts/15):/my/proj/homeauto/espNode% catchsegv ./readcam.py --cam office_back_cam --port 10021 + + + +esphome: + name: office_back_cam + platform: ESP32 + board: esp32cam + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: '' + use_address: '10.2.0.35' + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +logger: + baud_rate: 115200 + level: DEBUG + +ota: + +api: + port: 6053 + password: 'MyPassword' + +# https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/ +esp32_camera: + external_clock: + pin: GPIO0 + frequency: 20MHz + i2c_pins: + sda: GPIO26 + scl: GPIO27 + data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35] + vsync_pin: GPIO25 + href_pin: GPIO23 + pixel_clock_pin: GPIO22 + power_down_pin: GPIO32 + + name: camera + + # https://github.com/esphome/esphome/blob/dev/esphome/components/esp32_camera/esp32_camera.cpp#L265 says a 'stream' is 5 sec long + + # setting to 5 causes 'Setup Failed: ERROR' + max_framerate: 4 fps + # https://github.com/raphaelbs/esp32-cam-ai-thinker#capabilities says camera + # is likely ov2640 with these native resolutions: + # uxga=1600x1200 svga=800x600 cif=400x296 + + # 160x120 (QQVGA) 'Got invalid frame', then no more + # 128x160 (QQVGA2) + # 176x144 (QCIF) fps: 25 jpg: 20 img: 2KB burst of frames then stopped. + # fps: 20 jpg: 20 no frames + # 240x176 (HQVGA) + # 320x240 (QVGA) fps: 10 jpg: 20 some frames, 4.5KB + # 400x296 (CIF) + # 640x480 (VGA) fps: 4 jpg: 10 works, 20KB + # 800x600 (SVGA) + # 1024x768 (XGA) + # 1280x1024 (SXGA) fps: 1 works + # 1600x1200 (UXGA) + + resolution: 640x480 + + # 10 to 63. default=10. higher is + # worse. https://github.com/esphome/esphome/blob/6682c43dfaeb1c006943ae546145e5f22262cadb/esphome/components/esp32_camera/__init__.py#L84 + # sets the lower limit to 10, but + # https://github.com/raphaelbs/esp32-cam-ai-thinker/blob/master/components/ov2640/sensors/ov2640.c#L345 + # suggests that it might be 0 (for an ov2640, anyway). + jpeg_quality: 10 + +output: + - platform: gpio + pin: GPIO4 + id: gpio_4 + +light: + - platform: fastled_clockless + chipset: WS2812B + pin: GPIO13 + num_leds: 1 + rgb_order: GRB + name: "strip" + # - platform: monochromatic + # name: "flash" + # output: flash_out + - platform: binary + output: gpio_4 + name: flash + + +dallas: + - pin: GPIO15 + update_interval: 10s + +sensor: + - platform: dallas + index: 0 + name: temperature + +# output: +# - platform: ledc +# id: flash_out +# pin: GPIO4 +# frequency: 19531Hz
--- a/espNode/readcam.py Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/readcam.py Sun Jun 28 14:05:12 2020 -0700 @@ -5,6 +5,9 @@ import io import os import json +from docopt import docopt +from standardservice.logsetup import log, verboseLogging + logging.basicConfig(level=logging.INFO) from aiohttp import web from aiohttp.web import Response @@ -19,17 +22,34 @@ import numpy class CameraReceiver: - def __init__(self, loop): + def __init__(self, loop, host): self.lastFrameTime = None self.loop = loop + self.host = host self.lastFrame = b"", '' self.recent = [] async def start(self): - self.c = c = APIClient(self.loop, '10.2.0.21', 6053, 'MyPassword') - await c.connect(login=True) - await c.subscribe_states(on_state=self.on_state) - await c.request_image_stream() + try: + self.c = c = APIClient(self.loop, + self.host, + 6053, 'MyPassword') + await c.connect(login=True) + await c.subscribe_states(on_state=self.on_state) + except OSError: + loop.stop() + return + self.loop.create_task(self.start_requesting_image_stream_forever()) + + async def start_requesting_image_stream_forever(self): + while True: + try: + await self.c.request_image_stream() + except AttributeError: + self.loop.stop() + return + # https://github.com/esphome/esphome/blob/dev/esphome/components/esp32_camera/esp32_camera.cpp#L265 says a 'stream' is 5 sec long + await asyncio.sleep(4) def on_state(self, s): if isinstance(s, CameraState): @@ -38,8 +58,8 @@ self.recent = self.recent[-10:] self.recent.append(jpg) - print('recent lens: %s' % (','.join(str(len(x)) - for x in self.recent))) + #print('recent lens: %s' % (','.join(str(len(x)) + # for x in self.recent))) else: print('other on_state', s) @@ -66,14 +86,8 @@ self.lastFrame = jpg, msg self.lastFrameTime = time.time() else: - await asyncio.sleep(.5) - -loop = asyncio.get_event_loop() + await asyncio.sleep(.05) -recv = CameraReceiver(loop) -detector = apriltag.Detector() - -loop.create_task(recv.start()) def imageUri(jpg): return 'data:image/jpeg;base64,' + binascii.b2a_base64(jpg).decode('ascii') @@ -128,8 +142,35 @@ """ return Response(text=d, content_type='text/html') +arguments = docopt(''' +this +Usage: + this [-v] [--cam host] [--port to_serve] + +Options: + -v --verbose more log + --port n http server [default: 10020] + --cam host hostname of esphome server +''') + +verboseLogging(arguments['--verbose']) +logging.getLogger('aioesphomeapi.connection').setLevel(logging.INFO) + +loop = asyncio.get_event_loop() + +recv = CameraReceiver(loop, arguments['--cam']) +detector = apriltag.Detector() + +f = recv.start() +loop.create_task(f) + +start_time = time.time() app = web.Application() app.router.add_route('GET', '/stream', stream) app.router.add_route('GET', '/', index) -web.run_app(app, host='0.0.0.0', port=10020) +try: + web.run_app(app, host='0.0.0.0', port=int(arguments['--port'])) +except RuntimeError as e: + log.error(e) +log.info(f'run_app stopped after {time.time() - start_time} sec') \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/espNode/sonoff_light.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -0,0 +1,45 @@ +esphome: + name: sonoff_4 + platform: esp8266 + board: esp01_1m + build_path: build + +wifi: + ssid: !secret wifi_ssid + password: !secret wifi_password +# use_address: 10.2.0.96 +# domain: '.bigasterisk.com' + +mqtt: + broker: '10.2.0.1' + port: 1883 + username: '' + password: '' + +logger: + baud_rate: 115200 + level: INFO + +ota: + + +binary_sensor: + - platform: gpio + pin: + number: GPIO0 + mode: INPUT_PULLUP + inverted: True + name: "Sonoff Basic Button" + on_press: + - switch.toggle: relay + +switch: + - platform: gpio + name: "Sonoff Basic Relay" + pin: GPIO12 + id: relay + +status_led: + pin: + number: GPIO13 + inverted: yes
--- a/espNode/tasks.py Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/tasks.py Sun Jun 28 14:05:12 2020 -0700 @@ -8,6 +8,8 @@ @task def program_board_over_usb(ctx, board): + print('connect gnd, 3v3, rx/tx per https://randomnerdtutorials.com/esp32-cam-video-streaming-web-server-camera-home-assistant/, ') + print('rts to reset (if possible), dtr to gpio0 per https://github.com/espressif/esptool/wiki/ESP32-Boot-Mode-Selection#automatic-bootloader') ctx.run(f"docker run --rm -v `pwd`:/config -v /usr/share/fonts:/usr/share/fonts --device=/dev/ttyUSB0 -it {tag} {board}.yaml run", pty=True) @task
--- a/espNode/theater_blaster.yaml Sun Jun 28 14:03:10 2020 -0700 +++ b/espNode/theater_blaster.yaml Sun Jun 28 14:05:12 2020 -0700 @@ -2,7 +2,6 @@ name: theater_blaster platform: esp32 board: lolin32 - build_path: build # MAC: 3c:71:bf:ab:6e:94 @@ -16,23 +15,30 @@ port: 1883 username: '' password: '' - on_message: - - topic: theater_blaster/ir_out - payload: "volume_up" + on_json_message: + - topic: theater_blaster/ir_out/volume_up then: - remote_transmitter.transmit_nec: address: 0x4BB6 command: 0x40BF repeat: - times: 3 - - topic: theater_blaster/ir_out - payload: "volume_down" + times: !lambda |- + if (x.containsKey("times")) { + return x["times"]; + } + return 1; + - topic: theater_blaster/ir_out/volume_down then: - remote_transmitter.transmit_nec: address: 0x4BB6 command: 0xC03F repeat: - times: 3 + times: !lambda |- + if (x.containsKey("times")) { + return x["times"]; + } + return 1; + on_message: - topic: theater_blaster/ir_out payload: "input_bd" then: @@ -97,3 +103,20 @@ # address: 0x1234 # command: 0x78AB +i2c: + sda: 4 + scl: 15 + +font: + - file: "/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf" + id: font_vera + size: 20 + +display: + - platform: ssd1306_i2c + model: "SSD1306 128x64" + reset_pin: 16 + address: 0x3C + lambda: |- + it.print(128/2, 0+6, id(font_vera), TextAlign::TOP_CENTER, "big cast erisk"); + it.print(128/2, 64-6, id(font_vera), TextAlign::BOTTOM_CENTER ,"Volume 45");