--- a/rgbled/makefile	Sat Jun 13 04:36:05 2015 +0000
+++ b/rgbled/makefile	Sat Jun 13 04:33:52 2015 +0000
@@ -1,6 +1,6 @@
 BOARD_TAG    = nano328
 ARDUINO_LIBS = Adafruit_NeoPixel
 USER_LIB_PATH := $(realpath .)
-MONITOR_PORT = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A7027JI6-if00-port0
+MONITOR_PORT = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A7027NYX-if00-port0
 
 include /usr/share/arduino/Arduino.mk

--- a/rgbled/nanostrip.cc	Sat Jun 13 04:36:05 2015 +0000
+++ b/rgbled/nanostrip.cc	Sat Jun 13 04:33:52 2015 +0000
@@ -2,13 +2,15 @@
 #include <Adafruit_NeoPixel.h>
 
 /*
+  PWM is available on 3,5,6,9,10,11
+  
 Pin D3: blacklight pwm
-Pin D5: neo strip 1
-Pin D6: neo strip 2
-Pin D7: R
-Pin D8: G
-Pin D9: B
-Pin D10: blacklight 2
+Pin D4: neo strip 1
+Pin D6: R
+Pin D8: neo strip 2
+Pin D9: G
+Pin D10: B
+Pin D11: blacklight 2
  */
 
 
@@ -19,10 +21,11 @@
 //   NEO_GRB     Pixels are wired for GRB bitstream
 //   NEO_KHZ400  400 KHz bitstream (e.g. FLORA pixels)
 //   NEO_KHZ800  800 KHz bitstream (e.g. High Density LED strip)
-Adafruit_NeoPixel strip0 = Adafruit_NeoPixel(50, 5, NEO_RGB + NEO_KHZ800);
-Adafruit_NeoPixel strip1 = Adafruit_NeoPixel(50, 6, NEO_RGB + NEO_KHZ800);
+Adafruit_NeoPixel strip0 = Adafruit_NeoPixel(50, 4, NEO_RGB + NEO_KHZ800);
+Adafruit_NeoPixel strip1 = Adafruit_NeoPixel(50, 8, NEO_RGB + NEO_KHZ800);
 
 #define debugLed 13
+
 void intro() {
   uint32_t red = strip0.Color(255,0,0), black = strip0.Color(0,0,0);
   for (Adafruit_NeoPixel* strip = &strip0; strip != &strip1; strip = &strip1) {
@@ -33,17 +36,17 @@
   }
 }
 
-void setStrip(Adafruit_NeoPixel& strip) {
+void setStrip(Adafruit_NeoPixel* strip) {
   digitalWrite(debugLed, 1);
-  for (uint8_t i=0; i < strip.numPixels(); i++) {
+  for (uint8_t i=0; i < strip->numPixels(); i++) {
     while (Serial.available() < 3) {
     }
     byte r = Serial.read();
     byte g = Serial.read();
     byte b = Serial.read();
-    strip.setPixelColor(i, strip.Color(g, r, b));
+    strip->setPixelColor(i, strip->Color(g, r, b));
   }
-  strip.show();
+  strip->show();
 
   digitalWrite(debugLed, 0);
 }
@@ -53,11 +56,11 @@
   pinMode(debugLed, OUTPUT);
 
   pinMode(3, OUTPUT);
-  pinMode(7, OUTPUT);
-  pinMode(8, OUTPUT);
+  pinMode(6, OUTPUT);
   pinMode(9, OUTPUT);
   pinMode(10, OUTPUT);
-
+  pinMode(11, OUTPUT);
+  
   strip0.begin();
   strip1.begin();
   intro(); 
@@ -73,23 +76,23 @@
     }
     i = Serial.read(); // command
     if (i == 0) { // set strip: 0x60 0x00 <numPixels * 3 bytes>
-      setStrip(strip0);
+      setStrip(&strip0);
     } else if (i == 1) { // strip 1
-      setStrip(strip1);
-    } else if (i == 2) { // set pwm on D3: 0x60 0x02 <level>
+      setStrip(&strip1);
+    } else if (i == 2) { // set pwm on uv1: 0x60 0x02 <level>
       while (Serial.available() < 1) {
       }
       analogWrite(3, Serial.read());
-    } else if (i == 3) { // set pwm on D10: 0x60 0x03 <level>
+    } else if (i == 3) { // set pwm on uv2: 0x60 0x03 <level>
       while (Serial.available() < 1) {
       }
-      analogWrite(10, Serial.read());
+      analogWrite(11, Serial.read());
     } else if (i == 4) { // set r/g/b: 0x60 0x04 <r> <g> <b>
        while (Serial.available() < 3) {
        }
-       analogWrite(7, Serial.read());
-       analogWrite(8, Serial.read());
+       analogWrite(6, Serial.read());
        analogWrite(9, Serial.read());
+       analogWrite(10, Serial.read());
     } else {
         // unknown command
     }